Dan Lipman & Associates - Tool Board Shop Organizer

This versatile tool board allows you to hang almost any item for storage or display, including heavy tools, on hooks that don't fall out! This eliminates problems when trying to remove items hung up high, (like a rake or broom), where standard peg hooks usually fall out.

With our new Bungee Fasteners to hold tools, boards can now be used in vans and trucks. Tools will be much more accessible and will stay in place.
The board is totally water proof and weather proof. Board may be mounted outside to hold items like lawn sprinklers, hoses, nozzles and even pool supplies. Sub zero or extremely hot weather will have no effect on board's performance.
In addition, (with the use of our 3 different pin styles) this board allows you to space (plan-o-gram) at 1/4" increments both left to right and up and down. Typical peg board spacing is 2-1/2" between hooks on 1" on center pegboard and 1-1/2" between hooks on 1/2" on center pegboard.
This allows you to fit more items as well as odd shaped items on our board as compared to standard peg board. You can even hang hacksaw blades one next to the other (almost touching each other) or a complete socket set on a board with plenty of room for the ratchet and extensions. Try hanging extensions on conventional peg board! Our specialty pin (#3) and our heavy duty pin (#2) turned sideways allows for almost infinite spacing to hang items with odd widths.
Also, items like power tools can be literally outlined with our pins to form an "exact fit" slot on the board.
The board itself is approximately 24" x 30" and is made of a high rubber content high impact styrene. It weighs approximately 8 pounds. It has a border frame around it and looks totally finished when hung (no raw edges).
You can also mount items like storage bins or even shelving hardware to the board using #6 or #8 (1/2") screws (threads perfectly into any pin hole). Screws can be removed for future pin insertion.
The board may be mounted to a wall by screwing through the four thru holes located in each corner or by blind screwing through any of the more than 2,800 non thru pin holes in
the board (common sheet rock screws work very well).
The board can also be hung with the optional hanging bracket which retrofits (without tools) to existing pegboard. The hanging bracket also allows you to hang a board where future access behind is required. The board simply lifts off the secured bracket.
The bracket may also be desirable for ease in setting up the board by laying the tools out on a bench to position pins.
The board can also be easily cut with a saw to fit around obstacles (pipes, etc.) or to conform to odd shaped areas.
Board Kit includes thirty (30) pins - twenty #1 pins, five #2 pins and five #3 pins. The #1 is a standard pin, #2 is for heavier duty application, and #3 is a specialty pin which can be used either vertically or horizontally to hold many odd shaped items.
Suggested applications would be in work rooms, tool rooms, garages, sheds, barns, factories, etc..

You can also mount shelving or storage bins directly to the board using #8 screws! (Pins will still work in holes if screws are removed).

Dan Lipman & Associates - Index Page