Low-Rise Model Lifts
Low-Rise Models
The standard Low-Rise Series is what started it all! A 6,000 pound lifting capacity combined with durable construction makes this our most popular model. Each Low-Rise lift was specifically designed to increase efficiency and help make your job easier. Whether you want to bolt it down or roll it around your shop, you can depend on raising profits and productivity.
- Features:
- Dropped Crossbar - Unlike other lifts on the market, Bend-Pak has purposely lowered the center cross bar to provide added clearance for low ride-height vehicles and exhaust systems.
- Low Profile - A low four inch collapsed height allows you to service low to ground clearance vehicles.
- Hands Free Safety - The safety can be engaged and disengaged conveniently fro the power unit location. No more running back and forth.
- Hydraulic Operation - Provides smooth, powerful and dependable service.
- Dual Approach Design - Allows you to load the vehicle in either direction.
- Pad Design - Oversized rubber topped lifting pads provide quick loading and unloading of vehicles.
- High Speed - 0-26" inches in just 35 seconds!
- Sturdy Angle Frame Construction - Rugged 3" x 2" angle iron is used for the frame assembly for superior strength and durability.
- 3-Position Safety Locks - Three position safety locks engage automatically.
Our Commitment To Quality
Bend-Pak, Inc. Pit Stop lifts are warranted for one year on equipment structure, to be free of defects in material and workmanship. Bend-Pak, Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Bend-Pak, Inc. will pay labor costs for the term of the warranty only on parts returned as described previously. This warranty does not extend to defects caused by ordinary wear, abuse, misuse, overloading, shipping damage, concrete floor problems, improper installation or lack of required maintenance.
 |
|||
| Specifications | |||
| Model | LR-60 | LR-60P | |
| Style | Standard | Portable | |
| Lifting Capacity | 6,000 lbs. 2724 Kg. |
6,000 lbs. 2724 Kg. |
|
| Lifting Height W/Pads Only |
26" 660 mm |
26" 660 mm |
|
| Lifting Time | 36 Seconds | 36 Seconds | |
| Lowered Height | 4" 102 mm |
4" 102 mm |
|
| Max. Lifting Height With Blocks |
29" 737 mm |
29" 737 mm |
|
| Overall Length | 82" 2083 mm |
82" 2083 mm |
|
| Overall Width | 70" 1778 mm |
70" 1778 mm |
|
| Lift Pad Dimension | 18" x 52" 457 mm x 2591 mm |
18" x 52" 457 mm x 2591 mm |
|
| Standard Motor (*) | 110/220 VAC 60 Hz |
110/220 VAC 60 Hz |
|
|
(*) Different Voltage Options Are Available
Upon Request. Specifications and Design Features Are Subject To Change Without Notice. |
|||
 |
|||
- Related "Bend-Pak" Information
- About Bend-Pak Corporation - Informational Page
- Full Product-Line - Index Page
- Full Listing of Lifts
- Lift Accessories
