Bend-Pak Model HD-9 Four Post Lift Specifications
- 9,000 pound lifting capacity
- Optional caster kit available
- Freestanding design
- Perfect for PARKING, STORAGE or SERVICE.
- Dual-position runways accommodate wide or narrow vehicles.
- Runways include rail kit for optional accessories.
- Single hydraulic cylinder mounted underneath runway.
- Fully-enclosed lifting cables, safety locks, and sheaves.
- Pneumatic push-button safety release.
- Features heavy-duty 3/8" aircraft cable.
- Longer approach ramps for low ground clearance vehicles
- Safety locks enclosed in columns minimize pinch points.
- Oversized sheave diameter reduces cable fatigue.
- Rugged, self-lubricating cable sheaves combined with 1-1/4" sheave axles are fully enclosed minimizing pinch points.
- Multi-position safety locks in each column
- Power unit can be located at the front or rear of the lift.
- Designed to meet ANSI standards.
- Approach ramps can be removed for added clearance.
- Independent "back-up" slack-cable safety latches.
- Optional drive-thru ramps available.
- Optional drip trays available.
- Optional solid deck increases storage capacity.
- Optional 4,500 lb. "Low-Boy" air/hyd. rolling jacks available.
 |
| Model |
HD-9 |
|
| Lifting Capacity |
9,000lbs. / 4082 kg |
|
| A - Overall Width |
120-3/4" / 3067 mm |
|
| B - Outside Length |
174" / 4420 mm |
|
| C - Overall Length |
200" / 5080 mm |
|
| D - Height of Columns |
86" / 2184 mm |
|
| E - Min. Runway Height |
4-1/2" / 114 mm |
|
| F - Max Rise |
70" / 1778 mm |
|
| G - Lifting Height |
74-1/2" / 1892 mm |
|
| H - Width Between Posts |
106-3/4" / 2711 mm |
|
| I - Runway Width |
19" / 483 mm |
|
| J - Width Between Runways |
37-1/4" - 44" / 946 mm - 1118 mm |
|
| K - Length of Runways |
164" / 4166 mm |
|
| Lifting Time |
45 - 60 Seconds |
|
| Standard Motor |
220 VAC / 60 Hz. 1Ph. |
|
|
 |
|
